The inclino measurement system is a two component system (TX and RX) that can very accurately measure the inclination of any object. It is primarely designed to measure the critical vertical inclination of line array systems.
The actual sensor, called the TX, passes its data to the readout unit, the RX. This is done with standard available XLR3 microphone cable. The TX is equipped with two very strong Ndym magnets, so it attaches to the loudspeakersystems bumper frame easy without any tools. Connect the TX with the RX with a XLR3 microphone cable (up to 100m) and you are ready to go.
Incino TX sensor
Inclino RX readout unit
Push the "start" button, and the RX will show you immedeatly the actual inclination of your bumper frame within a 0,2 degree accuracy. The RX works on a standard 9V battery that also feeds the TX. An auto shut off function takes effect after +/- 2 minutes. The TX can stand moisture and rain according to IP67 standards. Read all about the importance of an accurate inclination of your loudspeaker system here .
Two very strong Neodymium magnets keep the TX firmly in place on any steel bumper frame.
System specs
Range:
Accuracy:
Auto shut-off:
Battery:
battery life:
Connection type:
Max. cable length:
Ingress protection TX:
Display:
Weight:
Dimensions:
Other:
-180 to 180 degrees
<0,2 degree
typ 0,1 degree
+/- 2 minutes
9V 6LR61 (standard 9V)
>150 measurements
XLR3 microphone cable
+100m
IP67 (sensor)
31/2 digit daylight visable with backlight
TX: 350 gr
RX: 400 gr
TX: 130 x 36 x 72mm
RX: 128 x 95 x 55 mm
TX includes an eyebolt for a safety cable